Frigidaire Ice Maker Not Making Ice? 10 Reasons Why and Fixes

Just so you know, Ice Department is reader-supported. We may earn an affiliate commission, a share of sales or other compensation when you buy through links on our site. Read our affiliate disclaimer below in the footer.
Spread the love

If your Frigidaire refrigerator is not making ice any longer, but the water dispenser still works, do not worry! This is a very common problem. Most professional repairman knows about it. 

Keep reading this document for the most usual underlying reasons the problem arises and you will uncover solutions on how to get your ice maker working again.

Ice Maker Switch Turned Off

If the fridge ice maker is not functioning, inspect the ice maker on/off button. It is possible that when you were reorganising your freezer you could have accidentally knocked the control arm, switch or button in the off position which halts the production of ice. 

If the button is turned on yet the ice maker still does not work, inspect the button for continuity with an Ohm meter. If it is faulty you will have no choice but to replace the on/off switch. 

Faulty Water Inlet Valve.

The water inlet shutoff could be malfunctioning if the temperature level is appropriate but the ice maker won’t function. The water inlet shutoff is an electrically-controlled mechanical shutoff that opens up to provide water to the dispenser and also ice maker. 

If the water inlet valve is defective, or if it has inadequate pressure, it will not permit water to move via the valve. Consequently, the ice maker won’t make ice.

Furthermore, if the water pressure is adequate, utilize a multimeter to inspect for power (continuity) to the water inlet shutoff. If the water inlet shutoff has sufficient pressure and also is obtaining power, but the ice maker won’t fill up with water to make ice, change the water inlet valve.

Low Water Pressure.

The water flow in the residence might be reduced and cause the ice maker to not work. The water inlet valve which supplies water to the ice maker is made to work with a minimum of 20 psi of water pressure. Check the pressure of the water to ensure that it is above or at that 20 psi level.

Clogged Water Filter.

If the fridge ice maker is not working the water filter might be obstructed. Try altering the water filter or changing it.

Faulty Door Seal.

If the faulty door seal is not working properly then we may have a big problem. When the temperature level sensor identifies warmer air, the controller maintains the compressor running overtime to preserve the appropriate 37-degree temperature level for fresh food. 

This too much air conditioning triggers the freezer temperature level to fall well below zero, which will ice up the tip of the water tube that gives the ice maker with water.

For correct door suction as well as securing, the doors require to be self-closing so their very own weight assists in maintaining the seal.

The leveling legs or rollers require to be adjusted to tilt the refrigerator back a little. When a correct seal is made, within 24 hours the defrost cycles will thaw the water tube and ice manufacturing will certainly begin.

Faulty Door Switch.

If the fridge ice maker is not functioning, the door switch might be faulty. When the freezer door is opened, the freezer door button does two important things: it activates the light in the freezer, and switches off the ice maker and also dispenser.

If the door button falls short, the dispenser will certainly not switch on. The button can be looked for connection with an Ohm meter. If it doesn’t have a connection, it must be replaced.

Freezer Temperature is Above 10 Degrees F (-12 C).

Whenever your ice maker quits working, check the temperature of the fridge freezer. If the freezer temperature level is over 10 degrees F (-12 C) the ice maker will certainly not work properly. It functions ideal when the freezer temperature is established between 0 and 5 degrees F (-18 to -15 C). 

If the freezer temperature is elevated, make sure the condenser coil is cleaned off, and the condenser fan is functioning to cool the condenser as well as compressor.

Inspect the evaporator coil for frost– if way too much frost builds up, the air can not circulate via the coil as well as you will certainly need to check the defrost parts for a failure.

Ice Level Control Board.

As ice is used up as well as the degree of ice goes down below the level of the infrared light beam inside the ice maker it will start once more to make ice cubes.

If the ice level control board fails, the ice maker will stop making ice. You may have to replace the level control board. 

Ice maker Mold Thermostat.

If the ice maker is not functioning, the icemaker mold thermostat could be faulty. Inside the control module of the ice maker is a thermostat which keeps track of the temperature of the ice mold (ice tray).

As soon as the mold gets to the appropriate temperature level, the ice maker begins a harvest cycle by ejecting the ice dices as well as replenishing with water.

If the fridge ice maker is not working, inspect the ice maker button. If the ice maker is not functioning it can be that the ice maker setting up itself is malfunctioning.

As ice is made use of up and the level of ice goes down below the light beam, the ice maker begins up again. If the ice degree control board stops working, the ice maker will stop making ice.

Inside the control module of the ice maker is a thermostat which monitors the temperature of the ice mold. The optimum temperature of the freezer should be between 0 – 5 degrees. If the thermostat is not working you may need to replace it as soon as possible.

Faulty Ice Maker Assembly.

If the ice maker is not working may be that the ice maker assembly itself is defective. There are numerous components in the control component of the ice maker that can fail, and also a lot of them are not offered separately. 

Ice makers have a fairly brief life expectancy, as well as might not always be worth dealing with. If other, less complex components like the water inlet valve or shut-off arm have been eliminated as an issue, the only thing left is the ice maker itself, it is much better to replace it as a device and save yourself the hassle.

You can check out the assembly here on Amazon. The link is an affiliate link and we may earn a commission. Check the part number before you purchase and replacement parts on Amazon.

Frigidaire parts: 

  • Frigidaire 241860812 Frigidare Ice Container Assembly For Refrigerator – check 
  • Frigidaire 5303918344 Icemaker Kit Check 
  • Frigidaire 241798231 Ice Maker Assembly Check on amazon

.Reference 

www.ifixit.com